How to Clean and Protect RV Wheels and Tires with Pure Magic Cleaner
Your RV’s wheels and tires take the most abuse — brake dust, road grime, tar, and UV rays can all cause damage over time. In this step-by-step guide, you’ll learn how to deep clean your RV wheels and tires safely using Pure Magic Cleaner, plus how to finish them off with a clean, protected look that lasts.
Estimated Reading Time: ~11 minutes
Why Wheel and Tire Care Matters for RVs
RV wheels and tires are exposed to constant wear and tear — long miles, sun, and road debris can quickly dull their appearance and weaken rubber over time. Proper cleaning and protection help prevent corrosion, cracking, and premature tire aging while keeping your RV looking its best.
The trick is using products designed to work with large, multi-surface vehicles — not harsh degreasers that strip finishes or fade trim. That’s where Pure Magic Cleaner comes in.
What Makes Pure Magic Cleaner Different?
Pure Magic Cleaner is an acid-based wheel and tire cleaner that’s powerful enough to break down brake dust, iron, and grime — but still safe for factory clear-coated wheels and rubber when used correctly. It also doubles as a pre-soak soap booster for heavily contaminated surfaces.
- → Removes stubborn brake dust and mineral buildup fast.
- → Safe on clear-coated wheels, rubber, and plastics.
- → Can be foamed or sprayed for easy coverage on RVs.
- → Perfect for large RV wheels, tires, and wheel wells.
What You’ll Need
- Pure Magic Cleaner
- All Dressed Up – for a matte, OEM-style tire dressing.
- All Blacked Out Applicators
- The Super Soaper – for pre-rinsing the entire RV.
- Wheel brush set (soft and stiff options).
- Pressure washer or garden hose.
- Microfiber towels and drying towel.
Step-by-Step: How to Clean RV Wheels and Tires
Step 1: Rinse the Wheels and Tires
Start by rinsing the wheels and tires with clean water to remove loose dirt and debris. If your RV has been on the road, this step prevents scratches from embedded grit. Use a pressure washer if available for maximum reach.
Step 2: Apply Pure Magic Cleaner
Spray Pure Magic Cleaner generously onto both the wheel face and tire sidewall. Let it dwell for 30–60 seconds — you’ll see brake dust and grime begin to dissolve. Avoid letting it dry in direct sunlight.
For larger RV wheels, foam it through a pump sprayer or foam cannon for faster coverage.
Best Wheel Cleaner for RVs: Pure Magic Cleaner
Remove brake dust, tar, and grime safely with this powerful acid-based cleaner made for large RV wheels.
Buy on Jimbo’s Detailing Buy on AmazonStep 3: Agitate with Brushes
Use a soft wheel brush for the faces and barrels, and a stiff tire brush for the sidewalls. Work the cleaner into a light foam to lift contamination. Focus on lug areas and inside spokes — RV wheels often hide grime deep inside.
Step 4: Rinse Thoroughly
Rinse the wheels and tires completely, making sure all residue and foam are gone. If necessary, repeat the process for heavily neglected surfaces. Always rinse from top to bottom for best results.
Step 5: Dry the Wheels
Use a dedicated microfiber or drying towel to wipe the wheels dry. This prevents water spotting and allows the dressing to bond better later.
Step 6: Dress the Tires with All Dressed Up
Apply All Dressed Up using an All Blacked Out Applicator. Spread evenly across the sidewall for a clean, satin finish that looks new — not greasy. This dressing nourishes the rubber and protects against UV cracking.
Best Tire Dressing for RVs: All Dressed Up
Get a clean, factory-matte tire finish that won’t sling or attract dust — perfect for large RV tires and trim.
Buy on Jimbo’s Detailing Buy on AmazonRV Wheel & Tire Care Comparison Chart
| Product | Use Case | Finish | Protection Duration |
|---|---|---|---|
| All Dressed Up | Rubber, trim, tires | Matte to satin (adjustable) | Up to 4 weeks |
| Pure Magic Cleaner | Wheels, tires, wheel wells | Restores clean, bright look | Immediate cleaning |
| Tough As Shell | Wheel face sealant | Glossy, hydrophobic | 3–6 months |
Pro Tips for RV Wheel and Tire Maintenance
- → Clean your wheels every 2–3 weeks to prevent heavy buildup.
- → Avoid silicone-based dressings that cause sling and dust attraction.
- → Apply Tough As Shell on the wheel face for easy cleaning next time.
- → Store your RV on clean, dry tires to prevent cracking during long-term parking.
Related Reading
- Tire Dressing for RVs: Glossy vs Matte Finishes
- The Best RV Wheel Brushes and Cleaning Tools
- How to Remove Brake Dust and Road Film Safely from RV Rims
- How to Wash an RV Without Leaving Water Spots
- The Ultimate Guide to RV Detailing
FAQs
Is Pure Magic Cleaner safe for all wheel types?
Yes — it’s safe for factory clear-coated, painted, and powder-coated wheels when used as directed. Avoid using on bare aluminum or anodized finishes.
How often should I clean my RV wheels?
Every 2–4 weeks, or after long road trips. Consistent maintenance prevents heavy buildup and corrosion.
Can I use Pure Magic Cleaner on the entire RV?
Yes, it can be diluted as a soap booster for exterior cleaning. Just avoid using it on uncoated aluminum or raw metal surfaces.
What’s the best way to make tire dressing last longer?
Clean tires thoroughly with Pure Magic Cleaner first, then apply All Dressed Up on dry rubber using the All Blacked Out Applicator.
Will All Dressed Up make my tires shiny?
It can! Apply more product for a satin look or wipe down for a clean, matte OEM finish.
