Is Foam Cannon Washing Safe for Ceramic Coated Cars?
YES—foam cannon washing is completely safe for ceramic coated cars. But → only if you use the right products and techniques. Here’s exactly how to do it the safe way.
Why Ceramic Coated Cars Need Special Care
Ceramic coatings provide amazing protection—but they are sensitive to:
- Harsh soaps → can degrade the coating.
- Poor wash techniques → can cause swirls and damage.
- Neglect → allowing contaminants to build up reduces performance.
That’s why your wash process is critical → and foam cannon washing is one of the safest ways to clean a ceramic coated car.
Why Foam Cannon Washing is Great for Ceramic Coatings
- Minimizes contact → foam lifts dirt off the surface so you don’t grind it in.
- Extends coating life → regular safe washing prevents contaminants from bonding to the coating.
- Maintains water beading and gloss → keeps your car looking freshly coated.
But → the soap you choose is critical → many “high foam” soaps are too harsh for coatings.
The Right Soap → The Super Soaper
After testing dozens of soaps → The Super Soaper is my top choice for foam washing ceramic coated cars.
Why it works:
- pH balanced → won’t degrade ceramic coatings.
- Thick foam → lifts dirt safely.
- Super slick → minimizes swirl risk during contact washing.
- Rinses clean → leaves no residue or film that can block coating performance.
How to Foam Wash a Ceramic Coated Car → Step-by-Step
Step 1 → Pre-Rinse the Car
- Rinse with clean water first → removes loose dirt and cools panels.
Step 2 → Foam with The Super Soaper
- Mix 2–4 oz of The Super Soaper with water in your foam cannon.
- Foam the entire car → let dwell for 3–5 minutes.
- DO NOT let the foam dry on the paint.
Step 3 → Contact Wash (Optional)
- Use an Orange Wash Microfiber Towel → wash top to bottom → flip towels frequently.
Step 4 → Rinse Thoroughly
- Rinse entire car with clean water → no foam or residue should remain.
Step 5 → Dry Safely
- Dry with a Massive Drying Towel → blot or glide gently.
Pro Tips → Maintain Your Ceramic Coating
- Wash regularly with The Super Soaper → keeps contaminants from bonding.
- Clay as needed → if beading starts to fade → use a safe clay method.
- Reapply Tough As Shell every 3–6 months to refresh protection.
Common Mistakes to Avoid
- Using harsh degreasers or dish soap → these can strip the coating.
- Skipping regular washing → contaminants build up and degrade performance.
- Using poor wash towels → can cause swirls → always use Orange Wash Microfiber.
The Bottom Line → Foam Cannon Washing is the Best Way to Maintain Ceramic Coatings
Foam cannon washing → done right → is one of the BEST ways to maintain your ceramic coating long term.
Just be sure to use:
- The Super Soaper → → safe, coating-friendly foam soap.
- Orange Wash Microfiber → → safe contact wash towel.
- Massive Drying Towel → → safe drying towel.
Follow this process → and your ceramic coating will stay protected, glossy, and hydrophobic for the long term!
