How to Use a Foam Cannon Like a Pro – Step-by-Step Guide
Foam cannons make washing safer and more fun. Here’s how to set yours up for thick, swirl-preventing foam using The Super Soaper.
What You’ll Need
- Foam cannon (with bottle and nozzle)
- Pressure washer (1.1 to 1.25 orifice recommended)
- The Super Soaper
- Water source and hose
Step 1: Mix Your Soap
Add 4 oz of The Super Soaper to your foam cannon bottle, then fill the rest with warm water. Shake gently to combine.
Step 2: Connect the Cannon
Attach the foam cannon to your pressure washer’s wand using the quick-connect fitting. Ensure the nozzle is aimed safely away from people or fragile items before turning it on.
Step 3: Adjust Your Settings
Most foam cannons let you adjust:
- Foam concentration (via top dial)
- Spray fan width (via nozzle twist)
Start with full foam output and a medium fan spray.
Step 4: Foam the Car
Start from the bottom and work upward for best foam coverage. Coat the entire vehicle and let dwell for 3–5 minutes. Don’t let it dry in direct sun.
Step 5: Rinse Thoroughly
Use your pressure washer to rinse from top to bottom. Remove all visible foam before you begin your contact wash with a soft microfiber towel.
Step 6: Follow With a Safe Contact Wash
Foam loosens dirt—but it doesn’t remove everything. Always follow with a safe contact wash using a towel like the Orange Wash Microfiber.
Tips for Better Foam
- Use warm water in the bottle
- Rinse out the cannon after each use
- Use distilled water if you have hard water buildup
Final Thoughts
Foam cannons make washing more effective, more enjoyable, and most importantly—safer for your paint. With the right soap and setup, you’ll get thick foam that clings, cleans, and helps reduce swirls during your wash process.
Get The Super Soaper – The Ultimate Foam Cannon Soap
