How to Apply Gloss Boss Ceramic Coating
You don’t need to be a pro to apply Gloss Boss like one. Just follow this step-by-step guide for flawless ceramic protection in your driveway or garage.
🧽 Step 1: Wash the Vehicle
Start with a clean slate. Use a pH-neutral soap like The Super Soaper to remove dirt and grime.
🧼 Step 2: Clay Bar or Clay Mitt
Decontaminate the paint using a traditional clay bar or clay mitt + wash towel combo to remove embedded contaminants.
🌀 Step 3: Polish for Best Bonding (Optional)
Use Picture Perfect Polish to remove swirls or oxidation and leave the paint ready to bond with the coating.
💨 Step 4: Wipe Down with Isopropyl Alcohol
This removes any leftover polishing oils. Use a 70% or 90% IPA mix and a soft microfiber towel.
🖐️ Step 5: Apply Gloss Boss
- Apply a few drops to a foam applicator.
- Wipe in a crosshatch pattern (up-down, then left-right).
- Wait 2-5 minutes for the rainbow haze to appear.
- Level the surface using a Softer Than Soft microfiber towel.
⏳ Step 6: Let It Cure
Avoid water or rain for at least 12 hours. Gloss Boss fully cures within 24–48 hours. Don’t wash for 7 days for best results.
✅ You’re Done
You now have long-lasting ceramic protection that resists dirt, UV rays, and chemicals—without needing pro help.
Get Gloss Boss Now or Buy on Amazon
FAQs
Do I need to polish before applying Gloss Boss?
It’s not required, but polishing improves bonding and the final look. We recommend Picture Perfect Polish for best results.
Can I apply Gloss Boss in direct sunlight?
Avoid direct sun and hot panels. Apply in the shade or a cool garage when possible.
Related Posts
